THROTTLE JOCKEY GOVERNORS WITH DIRECT RPM POT
• Regulation Range:
9500 ~ 20500 rpm engine shaft speed
4750 ~ 10250 4 stroke rpm w/2 magnets
• Control System: Adaptive, digital, Feed-Forward
• Control Resolution: (Decimation Error) 0.04Hz (2.26rpm engine speed)
• Response: 20ms
• Operating Voltage: 3.56 – 8V
• Operating Temp.: -40 to +85 degrees C
• Weight: 20g
• Current Drain: 17mA @ 4.8V
• Over-sampling: 8X
• Nominal Command: 1510us
• Absolute Range: 900us to 2200us
Suppliers Comments
|
• Designed by a model helicopter flyer, the Model Avionics "Throttle Jockey" is a rotor speed governor. This is the latest technology in rotor speed governors. The Throttle Jockey is a high performance, digital speed regulator for model helicopters designed to give optimum engine performance over the full pitch range. It uses an adaptive feed-forward control algorithm to regulate rotor speed. The Throttle Jockey was designed for easy setup and installation too!
• The Jockey continuously adapts to the response of the engine and the demands of the pilot. Aggressive throttle commands, such as 3D flying, cause the Jockey to under-damp the control loop yielding a fast response to changing loads and slowly changing throttle commands, as in FAI maneuvers, cause the Jockey to over-damp the control loop yielding a smooth response to changing loads.
• The Jockey employs a pulse filtering system that cleans up any hits or glitches on the auxiliary and throttle channels if used on an FM system. Speed can be changed in-flight by use of an Auxiliary channel on the transmitter. Easy setup and installation. Brackets and two 4mm magnets are supplied.
|
|
|
